Program Eligibility
- Single-family and multi-family residences must have permanently installed electric heat capable of heating the entire dwelling. Your utility will pay weatherization rebates only when electric heat is the primary heat source.
- A home energy audit is recommended if you cannot provide photos of the existing insulation prior to the start of the project. If you start insulation work before the verification of the existing insulation, you may not qualify for a rebate.
- Canby Utility reserves the right to inspect completed work. Rebates will be paid only on work that meets Canby Utility’s specifications as outlined in the BPA residential weatherization specifications.
Qualifying Energy Efficiency Improvements
The following energy efficiency improvements qualify for a rebate if they are recommended on the utility-approved audit:
- Insulation (attic, wall, and floor)
- House/Duct sealing
Incentives
(Rebates – Subject to Availability of Funds)
- Refer to your audit report for the estimated rebate amounts.
- Insulation (contractor installed), rebates are limited to 70% of the project cost.
- Window rebates: U-factor of 0.30 or lower — $7.00 per square foot of replacement windows.
- For owner-installed insulation, rebates are limited to 100% of the cost of materials only.
Note: Rebate amounts may change at any time.
Project Completion
- Projects must be completed with 90 days of the utility’s approval of your rebate request. Canby Utility cannot guarantee availability of incentives if project extends beyond 90 days from approval.
- After the project is completed, all final invoices and receipts must be submitted to Canby Utility upon completion.
- Rebate funds are not released until all invoices/receipts for the project are submitted to the utility.
Questions? Call (503) 266-1156.